Skip to main content
  1. Drone-parts/

F16 v3 50 mm EDF

1 min
Drone Parts 3D 3D print 3D printing STL

After many iterations, I am happy to say this is finally ready. I was not going to release this plane until I felt it was as good as the hobby king 50 mm, the hobby king 50 mm it’s about 100 g lighter but it makes less power. My design is to be used with the 50 mm power fun from Amazon. Make sure it’s the 4S version. The jet uses a 1300 mA 4 S battery. All up weight is around 650g. Only two 9g Amazon servos press fit into place with a tiny dab of hot glue only. It is all the control surfaces you will ever need.

Related

Mini STAND FOR RC PLANE – “MINI IRONMAN”
1 min
Drone Parts 3D 3D print 3D printing STL
ERC DinoAlien cloverleaf cam mount whoop canopy – open
1 min
Drone Parts 3D 3D print 3D printing STL
NEW For 2024 – RC PLANE STAND – ONE PIECE DESIGN
1 min
Drone Parts 3D 3D print 3D printing STL
ERC Erik’s RC Tiny whoop canopy
1 min
Drone Parts 3D 3D print 3D printing STL
HGLRC Sector D5 Runcam Thumb Pro Mount
1 min
Drone Parts 3D 3D print 3D printing STL
micro pan tilt gimbal w 2g servos
1 min
Drone Parts 3D 3D print 3D printing STL