Skip to main content
  1. Drone-parts/

H125 Micro Quad V1 -7mm/8.5mm Micro SciSky Based (under $50)

2 mins
Drone Parts 3D 3D print 3D printing STL

Looking for an affordable trainer quad that you’ll still enjoy flying after you’ve mastered your moves? This H125 micro quad might be the right choice. Measuring just under 100mm long, about 75mm wide, and 125mm diagonally, this is the perfect medium-sized micro quad for just about every skill level and every age. Weighing in at just 45 grams fully-stuffed, including the battery! We’ve based this micro around the 7mm brushed motor because we’ve found that they’re inexpensive yet get the job done. Instead of using screws and aluminum spacers, the quad is designed around a peg system that saves a significant amount of weight and makes construction and repairs a snap. Using a Turnigy nanotech 260mah lipo, you will get about 4 1/2 minutes of flight time. If you want to see this quad fly check out our micro quad flight video. If you have any suggestions on how we can modify our design to make it better just leave a comment. If you are looking to make and easy remix, our designs are also publicly available on Onshape. Please refer to links included at the bottom of the page for specific links to our designs. If you like this project, make sure to check out our other cool science projects on our youtube page!

Related

GO PRO RAISER FOR MASK, HELMET, HATS…
1 min
Drone Parts 3D 3D print 3D printing STL
xLabs Steez Upgrade Kit: Arm Protectors, GPS Mount, Soft Mount Pads
1 min
Drone Parts 3D 3D print 3D printing STL
Geprc Naked Gopro 9, 10, 11, 12 Protection Case
1 min
Drone Parts 3D 3D print 3D printing STL
DJI Mavic 2 load lifting device with hooks
1 min
Drone Parts 3D 3D print 3D printing STL
DIY Naked GoPro Hero 10 / Hero 9 frame & case
1 min
Drone Parts 3D 3D print 3D printing STL
GoPro Dji Osmo Action Actioncam Screw
1 min
Drone Parts 3D 3D print 3D printing STL