Skip to main content
  1. Drone-parts/

Spinning system for drone fishing DJI FPV and PRO

1 min
Drone Parts 3D 3D print 3D printing STL

his article has been specially designed for the DJI FPV but given the anchoring system to the drone it can also be used for the DJI PRO series. The device has been successfully tested with DJI FPV.
Going fishing even at night, I inserted a lighting system in the lower and upper flap system.
Being an aircraft modeler I designed the system based on my equipment using very small and light components.
Lipo battery 2s 0,620
Esc 5A
Micro servo
Rx 3ch
2 Led (white and green) 12V
The total weight is gr 140
For the coupling system, use only 3M Scotch SJ 3550 Dual Lock Hook and Loop, 1 m x 25.4 mm, the steel terminal with a minimum length of 3 meters to avoid turbulence.

Related

Insta 360 GO2 apex mount 25°
1 min
Drone Parts 3D 3D print 3D printing STL
DJI Inspire 2 Catch Handles
1 min
Drone Parts 3D 3D print 3D printing STL
Frank Citro Frame Runcam Thumb V1 Mount
1 min
Drone Parts 3D 3D print 3D printing STL
Jumper T20S gimbal and switch protection
1 min
Drone Parts 3D 3D print 3D printing STL
Variable Filter Adapter for GoPro Style Action Camera and IR Mods!
1 min
Drone Parts 3D 3D print 3D printing STL
SMA video anrtenna vertical holder – 3IN1
1 min
Drone Parts 3D 3D print 3D printing STL